Editorial Reviews:
Amazon.com Product Description
The perfect solution to a cluttered workbench, this practical accessory from Dremel conveniently suspends tools, conserving valuable workspace. It adjusts in height from 12 to 42-inches, and it clamps directly to tables or workbenches up to 1-3/4-inch thick. The wire hanger swivels 360-degrees and holds up to two tools. The power cord clasp keeps the tool cord away from work area for safer operation and the base provides storage for a handpiece and up to 12 bits, so you can really keep your work area clean. The 2222 is the holder only; all tools are sold separately. Some of the tools compatible with this accessory include No. 275-02 Single-Speed MultiPro Rotary Tool, No. 2850-02 Two-Speed MultiPro Rotary Tool Kit, No. 395 Variable-Speed MultiPro Rotary Tool, No. 398 Digital Rotary Tool, and the No. 7800-02 9.6-volt Cordless MultiPro Rotary Tool Kit.
Product Description
The perfect solution to a cluttered workbench, this practical accessory conveniently suspends tools, conserving valuable workspace.; Adjusts in height from 12" to 42".; Clamps directly to tables or workbenches up to 1-3/4" thick.; Wire hanger swivels 360 degrees and holds up to two tools.; Power cord clasp keeps tool cord away from work area for safer operation.; Base provides storage for a handpiece and up to 12 bits.; Includes holder only. Tools sold separately; Tools compatible with this accessory: #275-02 Single-Speed MultiPro Rotary Tool, #2850-02 Two-Speed MultiPro Rotary Tool Kit, #395 Variable-Speed MultiPro Rotary Tool, #398 Digital Rotary Tool, #7800-02 9.6V Cordless MultiPro Rotary Tool Kit,
|
Customer Reviews: Read 1 more reviews...
 A twenty-dollar hook to keep your flex shaft out of the way. August 27, 2008
~Qwkslvr
2 out of 13 found this review helpful
I don't own this handy little item for my 'Flex Shaft Attachment', however; I'm sure I could rig something similar for nothing from the stuff in my junk box.
A piece of pipe and a clothes hanger would do the job nicely. After that, it's a simple matter of attaching it to your work bench.
 Dremel Flex Shaft holder July 12, 2008
A. Gale (Calabasa, CA USA)
2 out of 2 found this review helpful
Love this item! Very handy, keeps my flex shaft out of the way when not in use, yet creates very easy access to it when needed. You have the option of either clamping it down to your workbench or actually screwing it in (comes with the screws) which is nice. I highly recommend it if you love using your Dremel flex shaft!
Another happy owner April 16, 2007
David Ford (Glen Burnie, MD United States)
3 out of 3 found this review helpful
Just got this as a gift from my wish list, makes a good low-cost gift. Ditto on the previous reviews, this is a must-have with the Flex Shaft.
The vertical support is made up of 3 tent pole-style tubes, so you can use any number of them, and the c-clamp allows you to slide the poles to any height (can extend below the clamp).
Also, the c-clamp has holes and provides 3 screws for a more permanent installation - 2 at the front and 1 at the top.
By the way, the description doesn't list it, but it is compatable with the 400 Series XPR tools.
A must have if yo have the flex shaft. August 11, 2006
ztiger (Weirton, WV United States)
1 out of 1 found this review helpful
If you have, or plan on getting the flex shaft, then this is a must have. I have this permanently mounted to my dremel work bench.
 Makes any Dremel-type tool more versatile November 21, 2003
jaedworks
13 out of 13 found this review helpful
The advantage of the flex shaft is that it lets you hang the Dremel on the stand, using a pencil-like tool at the "business end", to which you attach your bits (drill, polisher, engraver, or whatever). Because you're not holding the Dremel itself - only the flex shaft - you don't need to deal with the vibrations and weight of the Dremel, letting you do finer work. With the engine parked on the stand, you can grip the flex shaft like a pencil, giving you much more control over what you're doing. Get this stand, along with the flex shaft attachment for your Dremel model, if you're doing any sort of fine craft work or engraving - it's well worth it.
|
Store
top
