The integrated circuit from an Intel 8742, an 8-bit microcontroller that includes a CPU running at 12 MHz, 128 bytes of RAM, 2048 bytes of EPROM, and I/O in the same chip.

A micro-controller (also MCU or µC) is a functional computer system-on-a-chip. It contains a processor core, memory, and programmable input/output peripherals.

Microcontrollers include an integrated CPU, memory (a small amount of RAM, program memory, or both) and peripherals capable of input and output. ^[1]

It emphasizes high integration, in contrast to a microprocessor which only contains a CPU (the kind used in a PC). In addition to the usual arithmetic and logic elements of a general purpose microprocessor, the microcontroller integrates additional elements such as read-write memory for data storage, read-only memory for program storage, Flash memory for permanent data storage, peripherals, and input/output interfaces. At clock speeds of as little as 32KHz, microcontrollers often operate at very low speed compared to microprocessors, but this is adequate for typical applications. They consume relatively little power (milliwatts), and will generally have the ability to retain functionality while waiting for an event such as a button press or interrupt. Power consumption while sleeping (CPU and peripherals off) may be just nanowatts, making them ideal for low power and long lasting battery applications.

Microcontrollers are used in automatically controlled products and devices, such as automobile engine control systems, remote controls, office machines, appliances, power tools, and toys. By reducing the size, cost, and power consumption compared to a design using a separate microprocessor, memory, and input/output devices, microcontrollers make it economical to electronically control many more processes.

Embedded design

The majority of computer systems in use today are embedded in other machinery, such as automobiles, telephones, appliances, and peripherals for computer systems. These are called embedded systems. While some embedded systems are very sophisticated, many have minimal requirements for memory and program length, with no operating system, and low software complexity. Typical input and output devices include switches, relays, solenoids, LEDs, small or custom LCD displays, radio frequency devices, and sensors for data such as temperature, humidity, light level etc. Embedded systems usually have no keyboard, screen, disks, printers, or other recognizable I/O devices of a personal computer, and may lack human interaction devices of any kind.

Interrupts

It is mandatory that microcontrollers provide real time response to events in the embedded system they are controlling. When certain events occur, an interrupt system can signal the processor to suspend processing the current instruction sequence and to begin an interrupt service routine (ISR). The ISR will perform any processing required based on the source of the interrupt before returning to the original instruction sequence. Possible interrupt sources are device dependent, and often include events such as an internal timer overflow, an analog to digital conversion completing, a logic level change on an input such as from a button being pressed, and data received on a communication link. Where power consumption is important as in battery operated devices, interrupts may also wake a microcontroller from a low power sleep state where the processor is halted until required to do something by a peripheral event.

Programs

Microcontroller programs must fit in the available on-chip program memory, since it would be costly to provide a system with external, expandable, memory. Compilers and assembly language are used to turn high-level language programs into a compact machine code for storage in the microcontroller's memory. Depending on the device, the program memory may be permanent, read-only memory that can only be programmed at the factory, or program memory may be field-alterable flash or erasable read-only memory.

Other microcontroller features

Since embedded processors are usually used to control devices, they sometimes need to accept input from the device they are controlling. This is the purpose of the analog to digital converter. Since processors are built to interpret and process digital data, i.e. 1's and 0's, they won't be able to do anything with the analog signals that may be being sent to it by a device. So the analog to digital converter is used to convert the incoming data into a form that the processor can recognize. There is also a digital to analog converter that allows the processor to send data to the device it is controlling.

In addition to the converters, many embedded microprocessors include a variety of timers as well. One of the most common types of timers is the Programmable Interval Timer, or PIT for short. A PIT just counts down from some value to zero. Once it reaches zero, it sends an interrupt to the processor indicating that it has finished counting. This is useful for devices such as thermostats, which periodically test the temperature around them to see if they need to turn the air conditioner on, the heater on, etc.

Another feature is the time processing unit or TPU for short. It is essentially just another timer, but more sophisticated. In addition to counting down, the TPU can detect input events, generate output events, and other useful operations that are beyond the scope of this discussion.

Higher integration

In contrast to general-purpose CPUs, microcontrollers may not implement an external address or data bus as they integrate RAM and non-volatile memory on the same chip as the CPU. Using fewer pins, the chip can be placed in a much smaller, cheaper package.

Integrating the memory and other peripherals on a single chip and testing them as a unit increases the cost of that chip, but often results in decreased net cost of the embedded system as a whole. Even if the cost of a CPU that has integrated peripherals is slightly more than the cost of a CPU + external peripherals, having fewer chips typically allows a smaller and cheaper circuit board, and reduces the labor required to assemble and test the circuit board.

A microcontroller is a single integrated circuit, commonly with the following features:

• central processing unit - ranging from small and simple 4-bit processors to complex 32- or 64-bit processors
• discrete input and output bits, allowing control or detection of the logic state of an individual package pin
• serial input/output such as serial ports (UARTs)
• other serial communications interfaces like I˛C, Serial Peripheral Interface and Controller Area Network for system interconnect
• peripherals such as timers, event counters, PWM generators, and watchdog
• volatile memory (RAM) for data storage
• ROM, EPROM, EEPROM or Flash memory for program and operating parameter storage
• clock generator - often an oscillator for a quartz timing crystal, resonator or RC circuit
• many include analog-to-digital converters
• in-circuit programming and debugging support

This integration drastically reduces the number of chips and the amount of wiring and circuit board space that would be needed to produce equivalent systems using separate chips. Furthermore, and on low pin count devices in particular, each pin may interface to several internal peripherals, with the pin function selected by software. This allows a part to be used in a wider variety of applications than if pins had dedicated functions. Microcontrollers have proved to be highly popular in embedded systems since their introduction in the 1970s.

Some microcontrollers use a Harvard architecture: separate memory buses for instructions and data, allowing accesses to take place concurrently. Where a Harvard architecture is used, instruction words for the processor may be a different bit size than the length of internal memory and registers; for example: 12-bit instructions used with 8-bit data registers.

The decision of which peripheral to integrate is often difficult. The microcontroller vendors often trade operating frequencies and system design flexibility against time-to-market requirements from their customers and overall lower system cost. Manufacturers have to balance the need to minimize the chip size against additional functionality.

Microcontroller architectures vary widely. Some designs include general-purpose microprocessor cores, with one or more ROM, RAM, or I/O functions integrated onto the package. Other designs are purpose built for control applications. A microcontroller instruction set usually has many instructions intended for bit-wise operations to make control programs more compact. For example, a general purpose processor might require several instructions to test a bit in a register and branch if the bit is set, where a microcontroller could have a single instruction that would provide that commonly-required function.

Microcontrollers typically do not have a math coprocessor, so floating point multiplication and division are carried out using a standard library, or the faster and more compact Horner method.

Volumes

About 55% of all CPUs sold in the world are 8-bit microcontrollers. According to Semico, Over 4 billion 8-bit microcontrollers were sold in 2006.^[2]

A typical home in a developed country is likely to have only four general-purpose microprocessors but around three dozen microcontrollers. A typical mid range automobile has as many as 30 or more microcontrollers. They can also be found in any electrical device: washing machines, microwave ovens, telephones etc.

A PIC 18F8720 microcontroller in an 80-pin TQFP package.

Manufacturers have often produced special versions of their microcontrollers in order to help the hardware and software development of the target system. Originally these included EPROM versions that have a "window" on the top of the device through which program memory can be erased by ultra violet light, ready for reprogramming after a programming ("burn") and test cycle. Since 1998, EPROM versions are rare and have been replaced by flash, which are cheaper to manufacturer and use.

Other versions may be available where the ROM is accessed as an external device rather than as internal memory. A simple EPROM programmer, rather than a more complex and expensive microcontroller programmer, may then be used, however there is a potential loss of functionality through pin outs being tied up with external memory addressing rather than for general input/output. These kind of devices usually carry a higher cost but if the target production quantities are small, certainly in the case of a hobbyist, they can be the most economical option compared with the set up charges involved in mask programmed devices.

The use of field-programmable devices on a microcontroller may allow field update of the firmware or permit late factory revisions to products that have been assembled but not yet shipped. Programmable memory also reduces the lead time required for deployment of a new product.

Where a large number of systems will be made (say, several thousand), the cost of a mask-programmed memory is amortized over all products sold. A simpler integrated circuit process is used, and the contents of the read-only memory are set in the last step of chip manufacture instead of after assembly and test. However, mask-programmed parts cannot be updated in the field. If product firmware updates are still contemplated, a socket may be used to hold the controller which can then be replaced by a service technician, if required.

Programming environments

Microcontrollers were originally programmed only in assembly language, but various high-level programming languages are now also in common use to target microcontrollers. These languages are either designed specially for the purpose, or versions of general purpose languages such as the C programming language. Compilers for general purpose languages will typically have some restrictions as well as enhancements to better support the unique characteristics of microcontrollers. Some microcontrollers have environments to aid developing certain types of applications. Microcontroller vendors often make tools freely available to make it easier to adopt their hardware.

Many microcontrollers are so quirky that they effectively require their own non-standard dialects of C, such as SDCC for the 8051, which prevent using standard tools (such as code libraries or static analysis tools) even for code unrelated to hardware features. Interpreters are often used to hide such low level quirks.

Interpreter firmware is also available for some microcontrollers. Some early microcontrollers such as ^[3] were available with BASIC, and BASIC is still used on current parts.

Simulators are available for some microcontrollers, such as in Microchip's MPLAB environment. These allow a developer to analyse what the behaviour of the microcontroller and their program should be if they were using the actual part. A simulator will show the internal processor state and also that of the outputs, as well as allowing input signals to be generated. While on the one hand most simulators will be limited from being unable to simulate much other hardware in a system, they can exercise conditions that may otherwise be hard to reproduce at will in the physical implementation, and can be the quickest way to debug and analyse problems.

Recent microcontrollers are often integrated with on-chip debug circuitry that when accessed by an In-circuit emulator via JTAG, allow debugging of the firmware with a debugger.

Interrupt latency

In contrast to general-purpose computers, microcontrollers used in embedded systems often seek to minimize interrupt latency over instruction throughput.

When an electronic device causes an interrupt, the intermediate results, the registers, have to be saved before the software responsible for handling the interrupt can run, and then must be put back after it is finished. If there are more registers, this saving and restoring process takes more time, increasing the latency.

Low-latency MCUs generally have relatively few registers in their central processing units, or they have "shadow registers", a duplicate register set that is only used by the interrupt software.

History

The first microcontroller was the Intel 8048, released in 1976.

The popularity of microcontrollers increased when EEPROM memory was incorporated to replace one time programmable PROM memory. With EEPROM, the development cycle of programming, testing and erasing a part could be repeated many times with the same part until the firmware was debugged and ready for production use.

Nowadays microcontrollers are low cost and readily available for hobbyists.

See also

• Atmel_AVR
• BASIC Stamp
• Contiki
• In-circuit emulator
• List of common microcontrollers
• Microarchitecture
• Microbotics
• PIC microcontrollers
• Picotux
• Programmable logic controller

Notes

External links

• PIC Microcontroller Tutorial and Projects
• Microcontroller.com - Embedded Systems industry website with tutorials and dedicated resources
• Introduction to the MAXQ Architecture
• Understanding DC Electrical Characteristics of Microcontrollers
• Cornell ECE476 final project designs
• Microcontroller Projects Every Day
• Embedded Systems Design magazine

af:Mikrobeheerder ar:????? ???? bs:Mikrokontroler ca:Microcontrolador cs:Jedno?ipový po?íta? da:Mikrocontroller de:Mikrocontroller es:Microcontrolador fa:?????????? fr:Microcontrôleur gl:Microcontrolador ko:???????? hi:??????????????? id:Pengendali mikro is:Örtölva it:Microcontrollore hu:Mikrokontroller mk:?????????????? ml:?????????????????? ms:Mikropengawal nl:Microcontroller ja:?????????? no:Mikrokontroller nn:Mikrokontroller pl:Mikrokontroler pt:Microcontrolador ru:??????????????? si:?????????????? simple:Microcontroller sk:Mikrokontrolér sl:Mikrokontroler sr:?????????????? fi:Mikrokontrolleri sv:Mikrokontroller vi:Vi ?i?u khi?n tr:Mikrodenetleyici uk:?????????????? zh:???