Search: in
ITU G.992.3/4
ITU G.992.3/4 Encyclopedia
  Tutorials     Encyclopedia     Dictionary     Directory  
ITU_G.992.3/4 Email this to a friend      ITU_G.992.3/4

ITU G.992.3/4

ITU G.992.3/4
ITU G.992.3/4

ITU G.992.3/4

ITU G.992.3 is an ITU (International Telecommunication Union) standard, also referred to as ADSL2 or G.DMT.bis. It optionally extends the capability of basic ADSL in data rates to 12 Mbit/s downstream and 3.5 Mbit/s upstream (with a mandatory capability of ADSL2 transceivers of 8 Mbit/s downstream and 800 Kbit/s upstream). Actual speeds may reduce depending on line quality - usually the most significant factor in line quality is the distance from the DSLAM to the customer's equipment.

ITU G.992.4 is a standard for splitterless ADSL2 with data rate mandatory capability reduced to 1.536 MB/s downstream and 512 kbit/s upstream. It is also referred to as G.lite.bis.

ADSL2 Annexes

ADSL2 has multiple modes for DSL providers to offer better services for different needs. Below is a list of available features based on ADSL2 specs from the ITU standards.

Annex Version Spec Description
A xDSL over POTS xDSL service functioning over POTS.
B xDSL over ISDN xDSL Services running over ISDN Digital Phone services.
C xDSL in ISDN xDSL System operating in the same cable as ISDN as defined in ITU-T Rec. G.961 Appendix III (Currently not implemented)
D ATU-C and ATU-R state diagrams See Annex D/G.992.3
E POTS and ISDN-BA splitters See Annex E/G.992.3. For operation according to Annexes A,B and I, the G.992.3 requirements applying over a frequency band up to 1104 kHz shall be met over a frequency band up to 2208 kHz.
F ATU-x performance requirements for region A (North America) F.1 Performance requirements for operation of ADSL over POTS (Annex A)
F.2 Performance requirements for operation of All Digital Mode ADSL (Annex I)
F.3 Performance requirements for operation of ADSL over POTS with extended upstream bandwidth (Annex L)
G ATU-x performance requirements for region B (Europe) G.1 Performance requirements for operation of ADSL over POTS (Annex A)
G.2 Performance requirements for operation of ADSL over ISDN (Annex B)
G.3 Performance requirements for operation of All Digital Mode ADSL (Annex I)
G.4 Performance requirements for operation of All Digital Mode ADSL (Annex J)
G.5 Performance requirements for operation of ADSL over POTS, with extended upstream bandwidth (Annex L)
I All Digital mode POTS Extending ADSL band to use the voice frequency range, 32 upstream tones for an additional 256 kbit/s upstream data rate over POTS lines.
J All Digital mode ISDN Extending ADSL band to use the voice frequency range, 64 upstream tones for an additional 256 kbit/s upstream data rate over ISDN Lines.
L Reach Extended Increases the range of the DSL service enabling the link to work at a distance of 7 kilometers, or 23000 ft
M Increased Upload speeds Upstream/downstream frequency split has been shifted from 138 kHz up to 276 kHz, allowing maximum upstream bandwidth to be increased from 1.4 Mbit/s to 3.3 Mbit/s.

See also

External links

ca:Asymmetric Digital Subscriber Line 2 de:Asymmetric Digital Subscriber Line 2 es:ADSL2 it:ITU G.992.3/4 nl:ADSL2 pl:ADSL2 ru:ITU G.992.3/4 tr:ADSL2


ITU G.992.3/4
ITU G.992.3/4
ITU G.992.3/4
Source: Wikipedia | The above article is available under the GNU FDL. | Edit this article

ITU G.992.3/4
ITU G.992.3/4
Search for ITU G.992.3/4 in Tutorials
Search for ITU G.992.3/4 in Encyclopedia
Search for ITU G.992.3/4 in Dictionary
Search for ITU G.992.3/4 in Open Directory
Search for ITU G.992.3/4 in Store
Search for ITU G.992.3/4 in PriceGig


Help build the largest human-edited directory on the web.
Submit a Site - Open Directory Project - Become an Editor

ITU G.992.3/4
Advertisement

Advertisement



ITU G.992.3/4
ITU_G.992.3/4 top ITU_G.992.3/4
Home - Add TutorGig to Your Site - Disclaimer

©2008-2009 TutorGig.com. All Rights Reserved. Privacy Statement